STRESS-SKIN PANELS

Custom Made Panels
At Shelter Enterprises Inc., we specialize in the manufacturing of stress - skin panels for the post and beam industry, as well as refrigeration, commercial and industrial applications.

At SEI we go to great lengths to insure that each panel we manufacture meets our highest standards. Our panels are manufactured in a controlled environment which ensures superior quality.

Easy Installation
Our one of a kind laminated spline system eliminates air infiltration at every joint, while the bevels route system makes assembly trouble free.

OURS vs. "R"'s...
Our EPS has a guaranteed manufactures "R" value which remains stable throughout the life of the installation, this may not be the case with other products on the market.Our EPS has a guaranteed manufactures "R" value which remains stable throughout the life of the installation, this may not be the case with other products on the market.

Typical Physical Properties of EPS
PROPERTY	UNITS	ASTM TEST	DENSITY (pcf)
			1.0	1.25	1.50	2.0
Thermal resistance (R value) @75°F	one inch		3.85	3.92	4.00	4.17
Compressive strength at 10% deformation	psi	D1621	12-17	16-20	21-27	44
Flexural strength	psi	C203	28-35	45-60	55-70	80-95
Water vapor transmission	perm inch	C355	1.2-2.2	1.1-19	0.9-1.5	0.6-0.8
Water absorption (volume)	%	C272	1.5-2.5	1.5-2.5	1.5-2.0	1.5-2.0
Maximum service temp	°F		175°	175°	175°	175°
Coefficient of linear expansion	in/in/°F	D696	3.5x10-5	3.5xI0-5	3.5xl0-5	3.5x10-5

VERSATILITY
SEI is capable of accommodiating any of your special needs or request.

*Other available substrates:

OSB
Plywood
Gypsum
Kraft Paper
Fiberglass reinforced plastic
CDX, pressure treated CDX
Texture I-11
Foil Schrim
Aluminum Coil

All products also available with ISO or XPS core material.

"R" Value Through Cavity @75°F
.17	outside air film
.62	5 ply CDX plywood
21.45	5 1/2" expanded polystyrene
.62	5 ply CDX plywood
.45	1/2" gypsum board
.62	inside air film